Stock Portfolio Organizer

The ultimate porfolio management solution.

Shares, Margin, CFD's, Futures and Forex
EOD and Realtime
Dividends and Trust Distributions
And Much More ....
For Portfolio Manager Click Here

WiseTrader Toolbox

#1 Selling Amibroker Plugin featuring:

Advanced Adaptive Indicators
Advanced Pattern Exploration
Neural Networks
And Much More ....
Find Out More Here

PARTH DESAI - MOST ACCURATE TRADING IN COMMODITIES for Amibroker (AFL)

Rating:
2 / 5 (Votes 9)
Tags:
trading system, amibroker

Formula includes

1. Fibonacci bands
2. Bollinger Bands
3. EMA
4. Buy sell Signals
5. ADX
6. Super Trend
7. Volume Color Band
8. RSI
9. MACD
10.Ichimoku

Checked for commodities and nifty
Crude- 7 Min
Zinc/ Lead – 30 Mins
Nickel – 12 Mins
Nifty – 15 mins

GOLDEN RULEBUY ONLY IF THE PRICE IS ABOVE BLUE CLOUD
SELL ONLY IF THE PRICE IS BELOW BLUE CLOUD

Please mail your queries and suggestions on parth.desai@hotmail.com

Please change the position if signal disappears. Look for at least one trend per day.

Thank you

Indicator / Formula

Copy & Paste Friendly
//================= PARTH DESAI===============
//=======================MASTER STRATEGY=====================
//########################################################################
// SETUP ALL PARAMETERS
//########################################################################
//
DisplayAlerts = ParamToggle("Pop up Alerts","Off|On",0);
VoiceAlerts = ParamToggle("Voice Alerts","Off|On",0);
 
timeout = 1000;
 
StaticVarSetText( "CurrPos", "" );
 
function GetSecondNum()
{
    Time = Now( 4 );
    Seconds = int( Time % 100 );
    Minutes = int( Time / 100 % 100 );
    Hours = int( Time / 10000 % 100 );
    SecondNum = int( Hours * 60 * 60 + Minutes * 60 + Seconds );
    return SecondNum;
}
 
function PopupWindowEx( popupID, bodytext, captiontext, timeout, left, top )
{
    displayText = bodytext + captiontext;
 
    if ( ( StaticVarGetText( Name() + "prevPopup" + popupID ) != displayText ) OR ( StaticVarGet( Name() + "prevPopupTime" + popupID ) < GetSecondNum() ) )
    {
        StaticVarSetText( Name() + "prevPopup" + popupID, displayText );
        StaticVarSet( Name() + "prevPopupTime" + popupID, GetSecondNum() + timeout );
        if (DisplayAlerts ==1) {
			PopupWindow( bodytext, Captiontext + popupID, timeout, Left, top );
        	PlaySound( "c:\\windows\\media\\ding.wav" );
		 }
		 if (VoiceAlerts ==1) Say (bodytext);
    }
}
 
 
//=============================SETUP TREND======================================
//SetBarsRequired(100000,0);
pds = 20;
MAFAST = EMA( Close, 20 );
MASLOW = EMA( Close, 40 );
 
DonchianUpper = HHV( Ref( H, -1 ), pds ); // Highest high value of highs in last 20 periods
DonchianLower = LLV( Ref( L, -1 ), pds ); // Lowest low value of low in last 20 periods
DonchianMiddle = ( DonchianUpper + DonchianLower ) / 2;
 
UpTrend = C > ( LLV( L, 20 ) + 2 * ATR( 10 ) ) AND EMA( Close, 20 ) > EMA( Close, 40 );
DnTrend = C < ( HHV( H, 20 ) - 2 * ATR( 10 ) ) AND EMA( Close, 20 ) < EMA( Close, 40 );
Color = IIf( UpTrend, colorGreen, IIf( DnTrend, colorRed, colorCustom10 ) );
 
// Plots a 20 period Donchian channel
//Plot( C, "Price", Color, styleBar | styleThick );
 
 
//=============================DISPLAY PARAMS======================================
_SECTION_BEGIN("Price");
 Buy=Sell=Short=Cover=0;
SetChartOptions(0,chartShowArrows|chartShowDates);
_N(Title = StrFormat("{{NAME}} - {{INTERVAL}} {{DATE}} Open %g, High %g, Low %g, Close %g (%.1f%%) {{VALUES}}", O, H, L, C, SelectedValue( ROC( C, 1 ) ) ));
Plot( C, "Close", ParamColor("Color", colorBlack ), styleNoTitle | ParamStyle("Style") | GetPriceStyle() ); 
_SECTION_END();
 
_SECTION_BEGIN("Magnified Market Price");
procedure DrawData (Text, x1, y1, x2, y2, BoxColor, FontSize)
{
	GfxSetOverlayMode(0);
	GfxSelectFont("Segoe UI", FontSize, 600);
	//FS=Param("Font Size",FontSize,FontSize,100,1);
	//GfxSelectFont("Segoe UI", FS, 900, italic = False, underline = False, True );
	GfxSetBkMode(1);
	//GfxGradientRect(x1, y1, x2, y2, colorFrom, colorTo);
	GfxSelectSolidBrush( BoxColor);
	GfxRoundRect( x1, y1, x2, y2, 7, 7 );
	GfxDrawText(Text, x1, y1, x2, y2, 32|0|4|16);
}
GfxSetTextColor(colorWhite);
 
if(StaticVarGetText("firstflag")=="")
{
	StaticVarSetText ("firstflag","0");
}
 
if(StaticVarGetText("firstflag"+Name())=="")
{
	StaticVarSet(("BuyIndex" + Name()), 0);
	StaticVarSet(("BuyCount" + Name()), 0);
	StaticVarSet(("BuyFlag"  + Name()), 0);
	StaticVarSet(("BuyPrice"  + Name()), 0);
	StaticVarSet(("BuyQty"  + Name()), 0);
	
	StaticVarSet(("SellIndex" + Name()), 0);
	StaticVarSet(("SellCount" + Name()), 0);
	StaticVarSet(("SellFlag"  + Name()), 0);
	StaticVarSet(("SellPrice"  + Name()), 0);
	StaticVarSet(("SellQty"  + Name()), 0);
	
	StaticVarSet("LTPSave" + Name(), 0);
	StaticVarSet("LTQSave" + Name(), 0);
	StaticVarSet("VolumeTemp" + Name(), 0);
	StaticVarSet("AskSave" + Name(), 0);
	StaticVarSet("BidSave" + Name(), 0);
	
	StaticVarSet("LastLTPColor" + Name(), colorGrey40);
	StaticVarSet("LastLTQColor" + Name(), colorGrey40);
	StaticVarSet("LastAskColor" + Name(), colorGrey40);
	StaticVarSet("LastBidColor" + Name(), colorGrey40);
	
	StaticVarSetText("firstflag"+Name(), "0");
}
 
CurrentAskPrice = LastValue(Aux1);
CurrentBidPrice = LastValue(Aux2);
CurrentTradedPrice = LastValue(C);
CurrentVolume = LastValue(Volume);
 
LTPTemp = StaticVarGet("LTPSave" + Name());
LTQTemp = StaticVarGet("LTQSave" + Name());
VolumeTemp = StaticVarGet("VolumeTemp" + Name());
AskTemp = StaticVarGet("AskSave" + Name());
BidTemp = StaticVarGet("BidSave" + Name());
 
CurrentLTQ = (CurrentVolume - VolumeTemp);
 
if(CurrentLTQ < 0)
{
	CurrentLTQ = CurrentLTQ * -1;
}
 
if(CurrentLTQ == 0)
{
	CurrentLTQ = LTQTemp;
}
 
LTPColor = StaticVarGet("LastLTPColor" + Name());
LTQColor = StaticVarGet("LastLTQColor" + Name());
AskColor = StaticVarGet("LastAskColor" + Name());
BidColor = StaticVarGet("LastBidColor" + Name());
 
if(LTPTemp > CurrentTradedPrice)
{
	LTPColor = colorRed;
}
else if(LTPTemp < CurrentTradedPrice)
{
	LTPColor = colorGreen;
}
 
if(LTQTemp > CurrentLTQ)
{
	LTQColor = colorRed;
}
else if(LTQTemp < CurrentLTQ)
{
	LTQColor = colorGreen;
}
 
StaticVarSet("LastLTPColor" + Name(), LTPColor);
StaticVarSet("LastLTQColor" + Name(), LTQColor);
StaticVarSet("LastAskColor" + Name(), AskColor);
StaticVarSet("LastBidColor" + Name(), BidColor);
 
StaticVarSet("LTPSave" + Name(), CurrentTradedPrice);
StaticVarSet("LTQSave" + Name(), CurrentLTQ);
StaticVarSet("VolumeTemp" + Name(), CurrentVolume);
StaticVarSet("AskSave" + Name(), CurrentAskPrice);
StaticVarSet("BidSave" + Name(), CurrentBidPrice);
 
X0 = 10;
Y0 = 100;
YC=TimeFrameGetPrice("C",inDaily,-1);
DD=Prec(C-YC,2);
xx=Prec((DD/YC)*100,2);
 
//DrawData ("" + CurrentTradedPrice +" ("+xx+"%)", X0, Y0, X0+320, Y0+50, LTPColor, 30);
DrawData ("" + C, X0, Y0, X0+150, Y0+50, LTPColor, 30);
DrawData (" ("+xx+"%) ", X0+155, Y0, X0+300, Y0+50, LTPColor, 24);
DrawData (" LTQ : " + NumToStr(CurrentLTQ,1,0), X0, Y0+55, X0+100, Y0+85, LTQColor, 12);
 
/*
FS=Param("Font Size",30,30,100,1);
GfxSelectFont("Arial", FS, 900, italic = False, underline = False, True );
GfxSetBkMode( colorWhite );
GfxSetTextColor( ParamColor("Color",colorYellow) );
//Hor=Param("Horizontal Position",800,800,800,800);
  
Hor=Param("Horizontal Position",100,100,100,100);  
Ver=Param("Vertical Position",25,25,250,50);
GfxTextOut(""+C,Hor , Ver );
YC=TimeFrameGetPrice("C",inDaily,-1);
DD=Prec(C-YC,2);
xx=Prec((DD/YC)*100,2);
GfxSelectFont("Arial", 12, 700, italic = False, underline = False, True );
GfxSetBkMode( colorWhite );
GfxSetTextColor(ParamColor("Color",colorYellow) );
GfxTextOut(""+DD+" ("+xx+"%)", Hor+5, Ver+45 );
*/
_SECTION_END();
 
/*_SECTION_BEGIN("Name");
GfxSetOverlayMode(0);
GfxSelectFont("Tahoma", Status("pxheight")/8 );
GfxSetTextAlign( 0 );// center alignment
GfxSetTextColor( ColorHSB( 42, 42, 42 ) );
GfxSetBkMode(1); // transparent
Hor=Param("Horizontal Position",100,100,100,100);  
Ver=Param("Vertical Position",360,360,250,50);
GfxTextOut(""+Name(), Hor+5, Ver+45 );
_SECTION_END();
*/
 
_SECTION_BEGIN( "GFX EMA" );
procedure Plotlinewidth( pvalue, ptitle, pcolor, pstyle, pmin, pmax, pxshift, plinewidth, pshowdate )
{
    local pvalue, ptitle, pcolor, pstyle, pmin, pmax, pxshift, plinewidth, ppenstyle, pshowdate;
    local Miny, Maxy;
    local Lvb, fvb;
    local pxwidth, pxheight;
    local TotalBars, axisarea;
    local i, x, y;
 
    if ( plinewidth > 0 && Status( "action" ) == 1 && ( pstyle & styleLine == styleLine ) )
    {
        ////GfxSetOverlayMode( 0 );
        Miny = Status( "axisminy" );
        Maxy = Status( "axismaxy" );
        lvb = Status( "lastvisiblebar" );
        fvb = Status( "firstvisiblebar" );
        pxwidth = Status( "pxwidth" );
        pxheight = Status( "pxheight" );
        TotalBars = Lvb - fvb;
        xaxisarea = 56;
 
        if ( pshowdate )
            yaxisarea = 10;
        else
            yaxisarea = 0;
 
        i = 0;
 
        x = 5 + i * ( pxwidth - xaxisarea - 10 ) / ( TotalBars + 1 );
 
        y = 5 + yaxisarea + ( pvalue[i+fvb] - Miny ) * ( pxheight - yaxisarea - 10 ) / ( Maxy - Miny );
 
        GfxMoveTo( x, pxheight - y );
 
        for ( i = 1; i < TotalBars AND i < ( BarCount - fvb ); i++ )
        {
            GfxSelectPen( pcolor[i + fvb], plinewidth, 0 );
            x = 5 + i * ( pxwidth - xaxisarea - 10 ) / ( TotalBars + 1 );
            y = 5 + yaxisarea + ( pvalue[i+fvb] - Miny ) * ( pxheight - yaxisarea - 10 ) / ( Maxy - Miny );
            GfxLineTo( x, pxheight - y );
        }
    }
}
 
RequestTimedRefresh( 2 );
_SECTION_END();
 
 
 
_SECTION_BEGIN( "Small Triggers" );
p1 = Param( "TL 1 Periods", 20, 5, 50, 1 );
p2 = Param( "TL 2 Periods", 5, 3, 25, 1 );
TL1 = LinearReg( C, p1 );
TL2 = EMA( TL1, p2 );
Col1 = IIf( TL1 > TL2, ParamColor( "TL Up Colour", colorBrightGreen ), ParamColor( "TL Dn Colour", colorCustom12 ) );
ShortTrend = WriteIf( TL1 > TL2, "Uptrend", "Downtrend" );
Plot( TL1, "LinearReg(20)", Col1, styleLine | styleNoLabel );
Plot( TL2, "EMA(5)", Col1, styleLine | styleNoLabel ); // | styleThick
_SECTION_END();
 
_SECTION_BEGIN( "Large Triggers" );
p3 = Param( "TL 3 Periods", 80, 5, 100, 1 );
p4 = Param( "TL 4 Periods", 20, 3, 100, 1 );
TL3 = LinearReg( C, p3 );
TL4 = EMA( TL3, p4 );
Col1 = IIf( TL3 > TL4, ParamColor( "TLL Up Colour", colorBlue ), ParamColor( "TLL Dn Colour", colorRed ) );
LongTrend = WriteIf( TL3 > TL4, "Uptrend", "Downtrend" );
Plot( TL3, "LinearReg(80)", Col1, styleLine | styleNoLabel );
Plot( TL4, "EMA(20)", Col1, styleLine | styleNoLabel );
_SECTION_END();
 
_SECTION_BEGIN( "Fibo Retrace and Extensions" );
fibs = ParamToggle( "Plot Fibs", "Off|On", 1 );
pctH = Param ( "Pivot Hi %", 0.325, 0.001, 2.0, 0.002 );
HiLB = Param ( "Hi LookBack", 1, 1, BarCount - 1, 1 );
pctL = Param ( "Pivot Lo %", 0.325, 0.001, 2.0, 0.002 );
LoLB = Param ( "Lo LookBack", 1, 1, BarCount - 1, 1 );
Back = Param ( "Extend Left = 2", 1, 1, 500, 1 );
Fwd  = Param( "Plot Forward", 0, 0, 500, 1 );
text = ParamToggle( "Plot Text", "Off|On", 1 );
hts  = Param ( "Text Shift", -33.5, -50, 50, 0.10 );
style = ParamStyle( "Line Style", styleLine, styleNoLabel );
x = BarIndex();
pRp  = PeakBars( H, pctH, 1 ) == 0;
yRp0 = SelectedValue( ValueWhen( pRp, H, HiLB ) );
xRp0 = SelectedValue( ValueWhen( pRp, x, HiLB ) );
pSp  = TroughBars( L, pctL, 1 ) == 0;
ySp0 = SelectedValue( ValueWhen( pSp, L, LoLB ) );
xSp0 = SelectedValue( ValueWhen( pSp, x, LoLB ) );
Delta = yRp0 - ySp0;
 
function fib( ret )
{
    retval = ( Delta * ret );
    Fibval = IIf( ret < 1.0
                  AND xSp0 < xRp0, yRp0 - retval, IIf( ret < 1.0
                                                       AND xSp0 > xRp0, ySp0 + retval, IIf( ret > 1.0
                                                                                            AND xSp0 < xRp0, yRp0 - retval, IIf( ret > 1.0
                                                                                                                                 AND xSp0 > xRp0, ySp0 + retval, Null ) ) ) );
    return FibVal;
}
 
x0 = Min( xSp0, xRp0 ) - Back;
x1 = ( BarCount - 1 );
 
r236 = fib( 0.236 );
r236I = LastValue ( r236, 1 );
r382 = fib( 0.382 );
r382I = LastValue ( r382, 1 );
r050 = fib( 0.50 );
r050I = LastValue ( r050, 1 );
r618 = fib( 0.618 );
r618I = LastValue ( r618, 1 );
r786 = fib( 0.786 );
r786I = LastValue ( r786, 1 );
e127 = fib( 1.27 );
e127I = LastValue ( e127, 1 );
e162 = fib( 1.62 );
e162I = LastValue ( e162, 1 );
e200 = fib( 2.00 );
e200I = LastValue ( e200, 1 );
e262 = fib( 2.62 );
e262I = LastValue ( e262, 1 );
e424 = fib( 4.24 );
e424I = LastValue ( e424, 1 );
 
p00 = IIf( xSp0 > xRp0, ySp0, yRp0 );
p00I = LastValue ( p00, 1 );
p100 = IIf( xSp0 < xRp0, ySp0, yRp0 );
p100I = LastValue ( p100, 1 );
color00 = IIf( xSp0 > xRp0, colorLime, colorRed );
color100 = IIf( xSp0 < xRp0, colorLime, colorRed );
 
numbars = LastValue( Cum( Status( "barvisible" ) ) );
fraction = IIf( StrRight( Name(), 3 ) == "", 3.2, 3.2 );
 
if ( fibs == 1 )
{
    Plot( LineArray( xRp0 - Fwd, yRp0, x1, yRp0, Back ), "PR", 32, 8 | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( xSp0 - Fwd, ySp0, x1, ySp0, Back ), "PS", 27, 8 | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, r236, x1, r236, Back ), "", 45, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, r382, x1, r382, Back ), "", 44, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, r050, x1, r050, Back ), "", 41, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, r618, x1, r618, Back ), "", 43, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, r786, x1, r786, Back ), "", 42, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, e127, x1, e127, Back ), "e127", 47, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, e162, x1, e162, Back ), "e162", 47, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, e200, x1, e200, Back ), "p200", 47, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, e262, x1, e262, Back ), "p262", 47, style | styleNoRescale, Null, Null, Fwd );
    Plot( LineArray( x0 - Fwd, e424, x1, e424, Back ), "p424", 25, style | styleNoRescale, Null, Null, Fwd );
}
 
if ( text == 1 )
{
    PlotText( " 0% = " + WriteVal( p00, fraction ),     LastValue( BarIndex() ) - ( numbars / hts ), p00I  + 0.05, color00 );
    PlotText( "23% = " + WriteVal( r236, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r236I + 0.05, 45 );
    PlotText( "38% = " + WriteVal( r382, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r382I + 0.05, 44 );
    PlotText( "50% = " + WriteVal( r050, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r050I + 0.05, 41 );
    PlotText( "62% = " + WriteVal( r618, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r618I + 0.05, 43 );
    PlotText( "78% = " + WriteVal( r786, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), r786I + 0.05, 42 );
    PlotText( "100% = " + WriteVal( p100, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), p100I + 0.05, color100 );
    PlotText( "127% = " + WriteVal( e127, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e127I + 0.05, 47 );
    PlotText( "162% = " + WriteVal( e162, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e162I + 0.05, 47 );
    PlotText( "200% = " + WriteVal( e200, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e200I + 0.05, 47 );
    PlotText( "262% = " + WriteVal( e262, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e262I + 0.05, 47 );
    PlotText( "424% = " + WriteVal( e424, fraction ), LastValue( BarIndex() ) - ( numbars / hts ), e424I + 0.05, 25 );
}
 
_SECTION_END();
 
_SECTION_BEGIN( "Pivot Finder for Amibroker" );
/* **********************************
 
Code to automatically identify pivots
 
********************************** */
 
// -- what will be our lookback range for the hh and ll?
farback = Param( "How Far back to go", 100,50, 5000, 10 );
nBars = Param( "Number of bars", 12, 5, 40 );
 
// -- Title.
 
/*Title = Name() + " (" + StrLeft( FullName(), 15 ) + ") O: " + Open + ",
 
        H: " + High + ", L: " + Low + ", C: " + Close;
*/
 
// -- Plot basic candle chart
 
/*PlotOHLC( Open, High, Low, Close,
 
          "BIdx = " + BarIndex() +
 
          "\n" + "O = " + O + "\n" + "H = " + H + "\n" + "L = " + L
 
          + "\n" + "C ",
 
          colorBlack, styleBar );
*/
GraphXSpace = 7;
 
// -- Create 0-initialized arrays the size of barcount
 
aHPivs = H - H;
 
aLPivs = L - L;
 
// -- More for future use, not necessary for basic plotting
 
aHPivHighs = H - H;
 
aLPivLows = L - L;
 
aHPivIdxs = H - H;
 
aLPivIdxs = L - L;
 
nHPivs = 0;
 
nLPivs = 0;
 
lastHPIdx = 0;
 
lastLPIdx = 0;
 
lastHPH = 0;
 
lastLPL = 0;
 
curPivBarIdx = 0;
 
// -- looking back from the current bar, how many bars
 
// back were the hhv and llv values of the previous
 
// n bars, etc.?
 
aHHVBars = HHVBars( H, nBars );
 
aLLVBars = LLVBars( L, nBars );
 
aHHV = HHV( H, nBars );
 
aLLV = LLV( L, nBars );
 
// -- Would like to set this up so pivots are calculated back from
 
// last visible bar to make it easy to "go back" and see the pivots
 
// this code would find. However, the first instance of
 
// _Trace output will show a value of 0
 
aVisBars = Status( "barvisible" );
 
nLastVisBar = LastValue( Highest( IIf( aVisBars, BarIndex(), 0 ) ) );
 
_TRACE( "Last visible bar: " + nLastVisBar );
 
// -- Initialize value of curTrend
 
curBar = ( BarCount - 1 );
 
curTrend = "";
 
if ( aLLVBars[curBar] <
 
        aHHVBars[curBar] )
{
 
    curTrend = "D";
 
}
 
else
{
 
    curTrend = "U";
 
}
 
// -- Loop through bars. Search for
 
// entirely array-based approach
 
// in future version
 
for ( i = 0; i < farback; i++ ){
 
    curBar = ( BarCount - 1 ) - i;
 
// -- Have we identified a pivot? If trend is down...
 
    if ( aLLVBars[curBar] < aHHVBars[curBar] )
    {
 
// ... and had been up, this is a trend change
 
        if ( curTrend == "U" )
        {
 
            curTrend = "D";
 
// -- Capture pivot information
 
            curPivBarIdx = curBar - aLLVBars[curBar];
 
            aLPivs[curPivBarIdx] = 1;
 
            aLPivLows[nLPivs] = L[curPivBarIdx];
 
            aLPivIdxs[nLPivs] = curPivBarIdx;
 
            nLPivs++;
 
        }
 
// -- or current trend is up
 
    }
    else
    {
 
        if ( curTrend == "D" )
        {
 
            curTrend = "U";
 
            curPivBarIdx = curBar - aHHVBars[curBar];
 
            aHPivs[curPivBarIdx] = 1;
 
            aHPivHighs[nHPivs] = H[curPivBarIdx];
 
            aHPivIdxs[nHPivs] = curPivBarIdx;
 
            nHPivs++;
 
        }
 
// -- If curTrend is up...else...
 
    }
 
// -- loop through bars
 
}
 
// -- Basic attempt to add a pivot this logic may have missed
 
// -- OK, now I want to look at last two pivots. If the most
 
// recent low pivot is after the last high, I could
 
// still have a high pivot that I didn't catch
 
// -- Start at last bar
 
curBar = ( BarCount - 1 );
 
candIdx = 0;
 
candPrc = 0;
 
lastLPIdx = aLPivIdxs[0];
 
lastLPL = aLPivLows[0];
 
lastHPIdx = aHPivIdxs[0];
 
lastHPH = aHPivHighs[0];
 
if ( lastLPIdx > lastHPIdx )
{
 
// -- Bar and price info for candidate pivot
 
    candIdx = curBar - aHHVBars[curBar];
 
    candPrc = aHHV[curBar];
 
    if (
 
        lastHPH < candPrc AND
 
        candIdx > lastLPIdx AND
 
        candIdx < curBar )
    {
 
 
// -- OK, we'll add this as a pivot...
 
        aHPivs[candIdx] = 1;
 
// ...and then rearrange elements in the
 
// pivot information arrays
 
        for ( j = 0; j < nHPivs; j++ )
        {
 
            aHPivHighs[nHPivs-j] = aHPivHighs[nHPivs-
 
                                              ( j+1 )];
 
            aHPivIdxs[nHPivs-j] = aHPivIdxs[nHPivs-( j+1 )];
 
        }
 
        aHPivHighs[0] = candPrc ;
 
        aHPivIdxs[0] = candIdx;
 
        nHPivs++;
 
    }
 
}
else
{
 
 
// -- Bar and price info for candidate pivot
 
    candIdx = curBar - aLLVBars[curBar];
 
    candPrc = aLLV[curBar];
 
    if (
 
        lastLPL > candPrc AND
 
        candIdx > lastHPIdx AND
 
        candIdx < curBar )
    {
 
 
// -- OK, we'll add this as a pivot...
 
        aLPivs[candIdx] = 1;
 
// ...and then rearrange elements in the
 
// pivot information arrays
 
        for ( j = 0; j < nLPivs; j++ )
        {
 
            aLPivLows[nLPivs-j] = aLPivLows[nLPivs-( j+1 )];
 
            aLPivIdxs[nLPivs-j] = aLPivIdxs[nLPivs-( j+1 )];
 
        }
 
        aLPivLows[0] = candPrc;
 
        aLPivIdxs[0] = candIdx;
 
        nLPivs++;
 
    }
 
}
 
// -- Dump inventory of high pivots for debugging
 
/*
 
for (k=0; k<nHPivs; k++) {
 
_TRACE("High pivot no. " + k
 
+ " at barindex: " + aHPivIdxs[k] + ", "
 
+ WriteVal(ValueWhen(BarIndex()==aHPivIdxs[k],
 
DateTime(), 1), formatDateTime)
 
+ ", " + aHPivHighs[k]);
 
}
 
*/
 
// -- OK, let's plot the pivots using arrows
 
//============== EXPLORATION ============== 
Buy = aLPivs==1; 
Sell = aHPivs==1; 
//Buy = ExRem(Buy,Sell);
//Sell = ExRem(Sell,Buy);
BuyPrice = ValueWhen( Buy, O );
SellPrice = ValueWhen( Sell, O );
 
/*SellPrice=ValueWhen(Sell,C,1); 
BuyPrice=ValueWhen(Buy,C,1); 
Long=Flip(Buy,Sell); 
Shrt=Flip(Sell,Buy );
*/
 
autotrader= ParamToggle( "Automate Trade", "No|Yes", 0 );
 
if (autotrader == 1) SATC1.(Open, High, Low, Close, Volume, Aux1, Aux2, Buy, Sell, Sell, Buy);
 
for(i=BarCount-1;i>1;i--)
{
if(Buy[i] == 1)
{
entry = C[i];
sig = "BUY";
bars = i;
i = 0;
}
if(Sell[i] == 1)
{
sig = "SELL";
entry = C[i];
bars = i;
i = 0;
}
}
 
 
 
if ( sig =="BUY" )
{
    PopupWindowEx( "ID:0", "Get Ready to BUY  \n" + Name() + " @ " + BuyPrice, "Buy Alert -", timeout, 100, 1 );
}
else
{
    PopupWindowEx( "ID:1", "Get Ready to SELL  \n" + Name() + " @ " + SellPrice, "Sell Alert -", timeout, 100, 1 );
}
 
 
 
PlotShapes(shapeUpArrow*Buy,colorBrightGreen);
PlotShapes(shapeDownArrow*Sell,colorRed);
 
//PlotShapes( IIf( Sell, shapeDownArrow, shapeNone ), colorRed, 0, High, Offset = -15 );
//PlotShapes( IIf( Buy, shapeUpArrow , shapeNone ), colorBrightGreen, 0, Low, Offset = -15 );
 
 
//AlertIf( Sell, "SOUND C:\\Windows\\Media\\Ding.wav", "Sell " + C, 2, 1 + 2, 1 );
//AlertIf( Buy, "SOUND C:\\Windows\\Media\\Ding.wav", "Buy " + C, 1, 1 + 2, 1 );
 
dist = 1.1 * ATR( 15 );
 
for ( i=BarCount-1; i > 0; i-- )
{
    if ( Buy[i] )
        PlotText( "Buy@" + O[ i ], i, L[ i ] - dist[i], colorWhite, colorGreen);
 
    if ( Sell[i] )
        PlotText( "Sell@" + O[ i ], i, H[ i ] + dist[i], colorWhite, colorRed);
}
 
 
//============== MESSAGE BOARD ============== 
messageboard = ParamToggle( "Message Board", "Show|Hide", 0 );
 
//CUSTOM CODE FOR MESSAGE BOARD
Hp = HHV( H, 40 );
Lp = LLV( L, 40 );
 
BarsSincebuy = BarsSince( Buy );
BarsSinceshort = BarsSince( Sell );
LastSignal = IIf( BarsSincebuy < BarsSinceshort, 1, -1 );
Sig = WriteIf( BarsSincebuy < BarsSinceshort, "BUY", "SELL" );
 
slPrice = IIf( LastSignal == 1, HighestSince( Buy, Lp ), LowestSince( Sell , Hp ) );
initialrisk = IIf( LastSignal == 1, BuyPrice - SLPrice, SLPrice - SellPrice );
CurrentPL = IIf( LastSignal == 1, C - BuyPrice, SellPrice - C );
 
entry = IIf( LastSignal == 1, BuyPrice, SellPrice );
 
bars = LastValue( IIf( BarsSincebuy < BarsSinceshort, BarsSincebuy, BarsSinceshort ) );
Offset = 15;
Clr = IIf( LastValue( LastSignal ) == 1, colorGreen, colorRed );
 
if (messageboard == 0 )
{
    GfxSelectFont( "Tahoma", 11, 700 );
    GfxSetBkMode( 1 );
    GfxSetTextColor( colorWhite );
    GfxSetOverlayMode(0);
 
	LongCaution = ShortCaution = "";
 
    if ( SelectedValue( LastSignal ) == 1 )
    {
        GfxSelectSolidBrush( colorDarkGreen );
        Datetim = "" + ValueWhen( Buy, Hour(), 1 ) + ":" + ValueWhen( Buy, Minute(), 1 );
        tar1 = entry + ( entry * .0050 );
        tar2 = entry + ( entry * .0092 );
        tar3 = entry + ( entry * .0179 );
		 LongCaution = WriteIf(LongTrend == "Downtrend", " (Caution)", "");
		 ShortCaution = WriteIf(ShortTrend == "Downtrend", " (Caution)", "");
 
 
    }
    else
    {
        GfxSelectSolidBrush( colorDarkRed );
        Datetim = "" + ValueWhen( Sell, Hour(), 1 ) + ":" + ValueWhen( Sell, Minute(), 1 );
        tar1 = entry - ( entry * .0050 );
        tar2 = entry - ( entry * .0112 );
        tar3 = entry - ( entry * .0212 );
		 LongCaution = WriteIf(LongTrend == "Uptrend", " (Caution)", "");
		 ShortCaution = WriteIf(ShortTrend == "Uptrend", " (Caution)", "");
 
    }
 
    pxHeight = Status( "pxchartheight" );
 
    xx = Status( "pxchartwidth" );
    Left = 1100;
    width = 310;
    x = 1.5;
    x2 = 300;
    boxheight = 210;
    y = pxHeight / 1;
 
    GfxSelectPen( colorLightBlue, 1 );
    GfxRoundRect( x, y - 210, x2, y , 7, 7 ) ;
    GfxTextOut( ( " Trading System "),50, y-boxheight+10);
    GfxTextOut( ( " ..........................................." ), 5, y-boxheight+20 );
    GfxTextOut( ( "Last Signal" ), 13,y-boxheight+40 );
    GfxTextOut( ( ": " + Datetim ), 130, y-boxheight+40 );
    GfxTextOut( ( "" + sig + " Entry @" ), 13, y-boxheight+60 );
    GfxTextOut( ( ": " + entry ), 130, y-boxheight+60 );
    GfxTextOut( ( "Current P/L" ), 13, y-boxheight+80 );
    GfxTextOut( ( ": " + WriteVal( IIf( sig == "BUY", ( C - entry ), ( entry - C ) ), 2.2 ) ), 130, y-boxheight+80 );
    GfxTextOut( ( "Long Trend" ), 13, y-boxheight+100 );
    GfxTextOut( ( ": " + LongTrend + LongCaution ), 130, y-boxheight+100 );
    GfxTextOut( ( "Short Trend" ), 13, y-boxheight+120 );
    GfxTextOut( ( ": " + ShortTrend + ShortCaution ), 130, y-boxheight+120 );
    GfxTextOut( ( " ..........................................." ), 5, y-boxheight+130 );
    GfxTextOut( ("Target1"), 13, y-boxheight+150);
    GfxTextOut( ( ": " + tar1 ), 130, y-boxheight+150 );
    GfxTextOut( ("Target2"), 13, y-boxheight+170);
    GfxTextOut( ( ": " + tar2), 130, y-boxheight+170 );
    GfxTextOut( ("Target3"), 13, y-boxheight+190);
    GfxTextOut( ( ": " + tar3), 130, y-boxheight+190 );
 
}
_SECTION_END();
 
 
//SetChartBkGradientFill( ParamColor( "BgTop", ColorRGB( 0, 0, 0 ) ), ParamColor( "BgBottom", ColorRGB( 0, 0, 0 ) ), ParamColor( "titleblock", ColorRGB( 0, 0, 0 ) ) );
 
 
_SECTION_BEGIN("Volume At Price");
PlotVAPOverlay(Param("Lines", 1000, 100, 1000, 10), Param("Width", 15, 1, 100, 1), ParamColor("Color", colorBlue), ParamToggle("Side", "Left|Right", 1) | 4 *ParamToggle("Z-order", "On top|Behind", 1));
_SECTION_END();
 
 
 
//Volume Price Analysis AFL - VPA Version 3.0 -15-06-2015
// Revision Details
// V-2.0 AFL - fully re written for clarity, Minor bugs removed
// V-2.1 support and resistance line added
// V-2.2 Commentary for support and resistance line breaks Added.
// V-2.3 Revision detail- High volume Lines added
// V-2.4 Toggle switch for plotting S/R, High volume and Trend lines added
// V-2.5 Bar coloring option included - VSA based or Trend Based
// V-3.0 Trend detection Method changed to "Random Walk"
//===================Version V.3.0 ======================
//=========================================================================|
//                    VPA Basic Module                                     |
//=========================================================================|
_SECTION_BEGIN("VPA Basic Module");
SetChartOptions(0,chartShowArrows|chartShowDates);
gxs=Param("GRAPH spaceing",10,5,50,5);        
GraphXSpace = gxs; 
 SetChartBkColor(ParamColor("Outer panel",colorBlack)); // color of outer border 
    SetChartBkGradientFill( ParamColor("Inner panel upper",colorBlack),ParamColor("Inner panel lower",colorBlack));
 
//===================== Basic Definitions =======================================
volAvg				=	MA(V,90);
volMean 			= 	StDev(volAvg,30); 
volUpBand3 		= 	volAvg + 3*volMean; 
volUpband2 		= 	volAvg + 2*volMean;; 
volUpBand1 		= 	volAvg + 1*volMean;; 
volDnBand1 		= 	volAvg -1*volMean; 
volDnBand2 		= 	volAvg -2*volMean; 
midprice			=	(H+L)/2;
spread				=	(H-L);
avgSpread			=	MA(spread,90);
wideRangeBar		=	spread>(1.5*avgSpread);
narrowRangeBar	=	spread<(0.7*avgSpread);
lowVolume			=	V<Ref(V,-1) AND V<Ref(V,-2);
upBar				=	C>Ref(C,-1); 
downBar			=	C<Ref(C,-1); 
highVolume			=	V>Ref(V,-1) AND Ref(V,-1)>Ref(V,-2);
closeFactor		=	C-L;
clsPosition		=	spread/closeFactor;
closePosition		=	IIf(closeFactor=0,avgSpread,clsPosition);
Vb					=	V>volAvg OR V>Ref(V,-1);
upClose			=	C>=((spread*0.7)+L);// close is above 70% of the Bar
downClose			=	C<=((spread*0.3)+L);// close is below the 30% of the bar
aboveClose			=	C>((spread*0.5)+L);// close is between 50% and 70% of the bar
belowClose			=	C<((spread*0.5)+L);// close is between 50% and 30% of the bar
midClose			=	C>((spread*0.3)+L) AND C<((spread*0.7)+L);// close is between 30% and 70% of the bar
veryLowClose		=	closePosition>4;//close is below 25% of the bar
veryHighClose		=	closePosition<1.35;// Close is above 80% of the bar
ClosePos			= 	IIf(C<=((spread*0.3)+L),1,IIf(C<=((spread*0.5)+L),2,IIf(C<=((spread*0.7)+L),3,4)));
                    // 1 = downclose, 2 = belowclose, 3 = aboveClose, 4 = Upclose
Volpos				=  	IIf(V>volAvg*2,1,IIf(V>volAvg*1.3,2,IIf(V>volAvg,3,IIf(V<volAvg AND V>volAvg*0.7,4,5))));
						// 1 = Very High, 2 = High, 3 = Above Average, 4 = Less than Average, 5 = Low
freshGndHi       =  C > HHV(H,5);
freshGndLo       =  C < LLV(L,5);
 
//========================Trend Estimation =========================
j=MA(C,5);
trendLongTerm     =  LinRegSlope(j,40) ;
trendMediumTerm   =  LinRegSlope(j,10) ;
trendShortTerm    =  LinRegSlope(j,3);
tls=LinRegSlope(j,3);
_SECTION_END();
//=========================================================================|
//                    Trend Analysis Module                                |
//=========================================================================|
_SECTION_BEGIN("Trend Analysis");
SetChartOptions(0,chartShowArrows|chartShowDates);
 minperiodsRWIst = Param ( "Short term Min Periods", 2, 1, 9, 1); 
 maxperiodsRWIst = Param ( "Short term Max Periods", 8, 1, 9, 1); 
 
 minperiodsRWIlt = Param ( "Long Term Min Periods", 10, 1, 32, 1); 
 maxperiodsRWIlt = Param ( "Long term Max Periods", 40, 1, 64, 1);  
 
 Ground = RWIHi (minperiodsRWIst, maxperiodsRWIst); 
 Sky    = RWILo (minperiodsRWIst, maxperiodsRWIst);  
 j      = RWI(minperiodsRWIlt, maxperiodsRWIlt);
 k      =  RWI(minperiodsRWIst, maxperiodsRWIst);
 j2     = RWIHi (minperiodsRWIlt, maxperiodsRWIlt); 
 k2     = RWILo (minperiodsRWIlt, maxperiodsRWIlt); 
 ja     = Cross(j,1); // The followign section check the diffeent condition of the RWi above and below zero
 jb     = Cross(1,j); // In oder to check which trend is doing what
 jc     = Cross(-1,j);
 jd     = Cross(j,-1);
 j2a    = Cross(j2,1);
 j2b    = Cross(1,j2);
 k2a    = Cross(k2,1);
 k2b    = Cross(1,k2);
//Define the Major, Minor and Immediate trend Sttatus
upmajoron   = j > 1 AND Ref(ja,-1);
upmajoroff  = j < 1 AND Ref(jb,-1);
upminoron   = j2 > 1 AND Ref(j2a,-1);
upminoroff  = j2 < 1 AND Ref(j2b,-1);
dnmajoron   = j < -1 AND Ref(jc,-1);
dnmajoroff  = j > -1 AND Ref(jd,-1);
dnminoron   = k2 > 1 AND Ref(k2a,-1);
dnminoroff  = k2 < 1 AND Ref(k2b,-1);
upimd       = IIf(ground > 1, 1,0);
dnimd       = IIf(sky > 1, 1, 0);
upmajor     = IIf(j>1,1,IIf(j<(-1),-1,0));
upminor     = IIf(j2>1,1,-1);
dnminor     = IIf(k2>1,1,-1);
_SECTION_END();
//======================================================================|
//                      VSA Signal generation                           |
//======================================================================| 
_SECTION_BEGIN("Signal Generation");
 
upThrustBar		=	wideRangeBar AND downClose  AND trendShortTerm>0 AND H>Ref(H,-1);//WRB and UHS and Fresh Ground
nut              =   wideRangeBar AND downClose  AND freshGndHi AND HighVolume;// NEW SIGNAL
bc               =    wideRangeBar AND aboveclose AND V == HHV(V,60) AND upmajor==1;// NEW SIGNAL
upThrustBartrue	=	wideRangeBar AND downClose AND upmajor>0 AND H>Ref(H,-1);//occurs after a major uptrend
upThrustTHV		=	upThrustBartrue AND (VolPos == 2 OR VolPos == 1);
upThrustCond1		=	Ref(upThrustBar,-1) AND downBar ;
upThrustCond2		=	Ref(upThrustBar,-1) AND downBar AND VolPos == 2;
upThrustCond3		=	upThrustBar AND VolPos ==1;
topRevBar			=	Ref(V,-1)>volAvg  AND Ref(upBar,-1) AND Ref(wideRangeBar,-1) AND downBar AND downClose AND wideRangeBar AND trendLongTerm>0 AND H==HHV(H,10);
PseudoUpThrust	=	Ref(upBar,-1) AND Ref(V,-1)>1.5*volAvg AND downBar AND downClose AND  NOT upThrustBar;
pseudoUtCond		=	Ref(PseudoUpThrust,-1) AND downBar AND downClose AND NOT upThrustBar;
trendChange		=	Ref(upBar,-1) AND H==HHV(H,5)AND downBar AND (downClose OR midClose) AND V>volAvg AND NOT wideRangeBar AND NOT PseudoUpThrust ;
sellCond1			=	(upThrustCond1 OR upThrustCond2 OR upThrustCond3) ;
sellCond2			=	Ref(sellCond1,-1)==0;
sellCond			=	sellCond1 AND sellCond2;
strengthDown0		= 	trendLongTerm<0 AND V>Ref(V,-1) AND Ref(downBar,-1) AND upBar AND (upClose OR midClose) AND trendShortTerm<0 AND trendMediumTerm<0;// strength after a long down trend
strengthDown		= 	V>Ref(V,-1) AND Ref(downBar,-1) AND upBar AND (upclose OR midClose) AND trendShortTerm<0 AND trendMediumTerm<0;// Strength after a down trend
strengthDown1		= 	trendLongTerm<0 AND V>(volAvg*1.5) AND Ref(downBar,-1) AND upBar AND (upClose OR midClose)AND trendShortTerm<0 AND trendMediumTerm<0;//Strength after downtrend . High volume
strengthDown2		=	trendShortTerm<0 AND Ref(V,-1)<volAvg  AND upBar AND veryHighClose AND V>volAvg;
buyCond1			= 	strengthDown OR strengthDown1;
buyCond			= 	upBar  AND Ref(buyCond1,-1);
stopVolume			= 	L==LLV(L,5)  AND (upClose OR midClose) AND V>1.5*volAvg AND trendLongTerm<0;
bullBar			=	(V>volAvg OR V>Ref(V,-1)) AND closePosition <2 AND upBar ;
bearBar			=	vb  AND downClose AND downBar AND spread>avgSpread;
noDemandBar		=	upBar AND narrowRangeBar AND lowVolume  AND belowClose ;
strengthUp			= 	trendShortTerm>0 AND trendLongTerm<0 AND upBar AND V>Ref(V,-1) AND V>Ref(V,-2) AND upClose;
strengthBar		=	trendLongTerm>0 AND upBar AND V>Ref(V,-1) AND V>Ref(V,-2) AND upClose;
weakBar			=	trendLongTerm>0 AND trendShortTerm>0 AND spread>avgSpread AND veryLowClose;
weakUp				=	Ref(upBar,-1)AND Ref(wideRangeBar,-1)AND Ref(V,-1)>(2*volAvg) AND downBar AND V<Ref(V,-1) AND trendShortTerm>0;
noSupplyBar		=	downBar AND narrowRangeBar AND lowVolume  AND belowClose ;
revUpThrust		=	trendLongTerm<0 AND upBar AND upClose AND V>Ref(V,-1) AND V>volAvg AND  wideRangeBar AND Ref(downBar,-1) AND Ref(downClose,-1);
noBuyPress			= 	C>Ref(C,-1) AND lowVolume AND narrowRangeBar AND aboveClose;
ownerTransfer		=	wideRangeBar  AND V>(1.5*volAvg)AND midClose;
interSupport		=	trendShortTerm<0 AND trendLongTerm>0 AND upBar AND L<Ref(L,-1) AND L<Ref(L,-2) AND upClose;
confirmWeak		= 	Ref(topRevBar,-1) AND downBar AND V>Ref(V,-1) AND downClose;
testbar			=	L==LLV(L,5) AND upClose AND lowVolume;
testBar1			=	L==LLV(L,5) AND upClose AND wideRangeBar AND trendLongTerm<0 AND trendMediumTerm<0 AND lowVolume ;
lowVolTest    	=	lowVolume AND L<Ref(L,-1) AND upClose;
lowVolTest1		= 	V<volAvg AND L<Ref(L,-1) AND upClose AND trendLongTerm>0 AND trendMediumTerm>0 AND wideRangeBar;
lowVolTest2		= 	Ref(lowVolTest,-1) AND upBar AND upClose;
confirmStrength	= 	Ref(lowVolTest,-1) AND upBar AND V>Ref(V,-1) AND upClose AND trendShortTerm<0;
distributeBar		= 	V>2*volAvg AND downClose AND upBar AND trendShortTerm>0 AND trendMediumTerm>0 AND NOT sellCond1 AND NOT upThrustBar;
confirmWeak1		=	Ref(pseudoUtCond,-1) AND L<Ref(L,-1);
effortUp			=	H>Ref(H,-1) AND L>Ref(L,-1) AND C>Ref(C,-1) AND C>=((H-L)*0.7+L) AND spread>avgSpread AND V>Ref(V,-1);//AND O<=((H-L)*0.3+L) 
effortUpfail		=	Ref(effortUp,-1) AND (upThrustBar OR upThrustCond1 OR upThrustCond2 OR upThrustCond3);
effortDown			=	H<Ref(H,-1) AND L<Ref(L,-1) AND C<Ref(C,-1) AND  C<=((H-L)*0.25+L) AND spread>avgSpread AND V>Ref(V,-1);//O>=((H-L)*0.75+L) AND
_SECTION_END();
//|============================================================================================|
//|                                       TITLE                                                |
//|============================================================================================|
_SECTION_BEGIN("Title");
if( Status("action") == actionIndicator ) 
(
Title = Title + "\n" +EncodeColor(colorWhite)+ "Volume= "+WriteVal(V, 1.0)+"      "+EncodeColor(colorYellow)+
 
WriteIf (upThrustBartrue, " An Upthrust Bar after upmove. A Sure sign of weakness. ","")+
WriteIf (upThrustBar AND NOT upThrustBartrue, " An Upthrust Bar. A sign of weakness. ","")+
WriteIf (upThrustCond1, " A downbar after an Upthrust. Confirm weakness. ","")+
WriteIf (upThrustCond2 AND NOT upThrustCond1, " A High Volume downbar after an Upthrust. Confirm weakness.","")+
WriteIf (upThrustCond3, "This upthrust at very High Voume, Confirms weakness","")+
WriteIf (strengthDown1, "Strength seen returning after a down trend. High volume adds to strength. ","")+
WriteIf (strengthDown0 AND NOT strengthDown, "Strength seen returning after a down trend. ","")+
WriteIf (strengthDown AND NOT strengthDown1, "Strength seen returning after a down trend. ","")+
WriteIf (lowVolTest, "Test for supply. ","")+
WriteIf (lowVolTest2, "An upBar closing near High after a Test confirms strength. ","")+
WriteIf (buyCond, "An upBar closing near High. Confirms return of Strength. ","")+
WriteIf (distributeBar, "A High Volume Up Bar closing down in a uptrend shows Distribution. ","")+
WriteIf (PseudoUpThrust, "Psuedo UpThrust.   A Sign of Weakness. ","")+
WriteIf (pseudoUtCond, "A Down Bar closing down after a Pseudo Upthrust confirms weakness. ","")+
WriteIf (lowVolTest1, "Test for supply in a uptrend. Sign of Strength. ","")+
WriteIf (strengthDown2, "High volume upBar closing on the high indicates strength. ","")+
WriteIf (trendChange, "High volume Downbar after an upmove on high volume indicates weakness. ","")+
WriteIf (noDemandBar, "No Demand. A sign of Weakness. ","")+
WriteIf (noSupplyBar, "No Supply. A sign of Strength. ","")+
WriteIf (stopVolume, "Stopping volume. Normally indicates end of bearishness is nearing. ","")+
WriteIf (revUpThrust, "Reverse upthrust. Indicates strength. ","")+
WriteIf (effortUp, "Effort to Rise. Bullish sign ","")+
WriteIf (effortDown, "Effort to Fall. Bearish sign ","")+
WriteIf (effortUpfail, "Effort to Move up has failed. Bearish sign ","")+
WriteIf (bc,"Potential Buying climax","")+
("\n Volume: ")+WriteIf(V>volAvg*2,EncodeColor(colorGreen)+"Very High",WriteIf(V>volAvg*1.3,EncodeColor(colorGreen)+
" High",WriteIf(V>volAvg,EncodeColor(colorGreen)+"Above Average",
WriteIf(V<volAvg AND V>volAvg*0.7,EncodeColor(colorRed)+"Less than Average",WriteIf(V<volDnBand1,"Low","")))))+
(EncodeColor(colorYellow)+"      Spread: ")+WriteIf(spread >(avgSpread*1.5),EncodeColor(colorGreen)+" Wide",
WriteIf(spread>avgSpread,EncodeColor(colorGreen)+" Above Average",EncodeColor(colorRed)+WriteIf((spread < avgSpread AND spread >= (AvgSpread*0.7)),"Below Average",
WriteIf(spread < AvgSpread*0.5,EncodeColor(colorRed)+"Very Narrow"," Narrow"))))+
(EncodeColor(colorYellow)+"      Close:  ")+WriteIf(veryHighClose,EncodeColor(colorGreen)+"Very High",WriteIf(upClose,EncodeColor(colorGreen)+"High",WriteIf(midClose,EncodeColor(colorYellow)+"Mid",
WriteIf(downClose,EncodeColor(colorRed)+"Down","Very Low"))))+ 
EncodeColor(colorYellow)+("\n Major Trend:  ")+WriteIf(upmajor==1,EncodeColor(colorGreen)+"Major Trend UP",WriteIf(upmajor== -1,EncodeColor(colorRed)+
"Major Trend Down",EncodeColor(colorYellow)+"No Trend"))+
WriteIf(upmajoroff,EncodeColor(colorRed)+"    Major UpTrend Ended",WriteIf(dnmajoroff,EncodeColor(colorGreen)+"  Major Down Trend Ended","" ))+
EncodeColor(colorYellow)+("\n Minor Trend:  ")+WriteIf(upminor==1,EncodeColor(colorGreen)+"Minor trend up",WriteIf(dnminor==1,
EncodeColor(colorRed)+"Minor Trend Down",EncodeColor(colorYellow)+"No Trend"))+
EncodeColor(colorYellow)+("\n Immediate Trend:  ")+WriteIf(upimd==1,EncodeColor(colorGreen)+"Immediate trend up",WriteIf(dnimd==1,
EncodeColor(colorRed)+"Immediate Trend Down",EncodeColor(colorYellow)+"No Trend")));
_SECTION_END();
//====================================================================================|
//                        Plotting Module                                             |
//====================================================================================|
_SECTION_BEGIN("Plotting");
//Bar coloring formula 1 _ Preferred - Based on VSA Strength
Vscolor=IIf(lowVolTest,colorTurquoise,IIf(distributeBar,colorPink,IIf(ownerTransfer,colorDarkRed ,IIf(upThrustBar,colorYellow ,IIf(bullbar,colorLime ,
IIf(bearbar,colorRed,IIf(noDemandBar,colorWhite ,IIf(noSupplyBar,colorCustom12,IIf(upbar,colorGreen,IIf(downbar,colorOrange,colorBlue))))))))));
//Bar coloring formula 2 _  Based on Trend 
Trcolor=IIf(trendShortTerm>0 AND trendMediumTerm>0 AND trendLongTerm>0,colorLime,IIf(trendShortTerm>0 AND trendMediumTerm>0 AND trendLongTerm<0,colorGreen,
IIf(trendShortTerm>0 AND trendMediumTerm<0 AND trendLongTerm<0,colorPaleGreen,IIf(trendShortTerm<0 AND trendMediumTerm<0 AND trendLongTerm<0,colorRed,IIf(trendShortTerm<0 AND trendMediumTerm>0 AND trendLongTerm>0,colorPaleGreen,
IIf(trendShortTerm<0 AND trendMediumTerm<0 AND trendLongTerm>0,colorOrange,colorBlue))))));
SelectedIndicator = ParamList( "Chart Coloring", "VSA Based,Trend Based", 1 );
switch ( SelectedIndicator )
{
case "VSA Based":
//PlotOHLC( Open,  High,  Low,  Close, "", VScolor, styleBar |styleThick );
break;
case "Trend Based":
//PlotOHLC( Open,  High,  Low,  Close, "", Trcolor, styleBar |styleThick );
break;
}
//=============================== PLOT SHAPES SECTION============================
DeepAnalysis = ParamToggle("Show Deep Analysis Marks","Off|On",0);
if ( DeepAnalysis == 1 )
{
    PlotShapes( shapeSmallDownTriangle*( upThrustBar ) , colorRed, 0, H, -20 );
    PlotShapes( shapeHollowSmallDownTriangle*( upThrustBar ) , colorYellow, 0, H, -20 );
    PlotShapes( shapeSmallCircle*topRevBar, colorBlue, 0, H, 20 );
    PlotShapes( shapeSmallDownTriangle*sellCond, colorRed, 0, H, -20 );
    PlotShapes( shapeSmallSquare*strengthDown, colorLime, 0, L, -20 );
    PlotShapes( shapeSmallSquare*strengthDown1, colorLime, 0, L, -20 );
    PlotShapes( shapeSmallSquare*lowVolTest1, colorLime, 0, L, -20 );
    PlotShapes( shapeSmallUpTriangle*lowVolTest2, colorYellow, 0, L, -20 );
    PlotShapes( shapeHollowSmallCircle*stopVolume, colorLime, 0, L, -10 );
    PlotShapes( shapeSmallUpTriangle*buyCond, colorLime, 0, L, -20 );
    PlotShapes( shapeSmallSquare*( PseudoUpThrust ) , colorBlue, 0, H, 10 );
    PlotShapes( shapeSmallDownTriangle*( pseudoUtCond ) , colorBlue, 0, H, -20 );
    PlotShapes( shapeSmallDownTriangle*trendChange , colorYellow, 0, H, -20 );
    PlotShapes( shapeSmallUpTriangle*strengthDown2, colorAqua, 0, L, -20 );
    PlotShapes( shapeSmallSquare*( distributeBar ) , colorBlue, 0, H, 10 );
    PlotShapes( shapeSmallSquare*noDemandBar, colorCustom12, 0, H, 10 );
    PlotShapes( shapeSmallSquare*( confirmWeak1 ), colorWhite, 0, L, -10 );
    PlotShapes( shapeSmallCircle*noSupplyBar, colorLime, 0, L, -20 );
    PlotShapes( shapeSmallCircle*effortUp, colorTurquoise, 0, midprice, 0 );
    PlotShapes( shapeSmallCircle*effortDown, colorYellow, 0, midprice, 0 );
    PlotShapes( shapeSmallSquare*revUpThrust, colorYellow, 0, L, -20 );
    PlotShapes( shapeHollowSmallCircle*ownerTransfer, colorRed, 0, midprice, 0 );
    PlotShapes( shapeSmallSquare*lowVolTest, colorCustom12, 0, L, -20 );
    PlotShapes( shapeSmallSquare*( upThrustBartrue AND NOT sellCond ) , colorWhite, 0, H, 10 );
    PlotShapes( shapeSmallDownTriangle*( nut ) , colorLime, 0, H, -40 );
    PlotShapes( shapeSmallDownTriangle*( bc ) , colorDarkRed, 0, H, -20 );
    PlotShapes( shapeHollowSmallDownTriangle*( bc ) , colorYellow, 0, H, -20 );
}
_SECTION_END();
//====================================================================================|
//                       Commentry Module                                             |
//====================================================================================|
_SECTION_BEGIN("Commentary");
Vpc= upThrustBartrue OR upThrustCond1 OR upThrustCond2 OR upThrustCond3 OR strengthDown0 OR strengthDown1 OR strengthDown2 OR 
strengthDown OR lowVolTest1 OR pseudoUtCond OR lowVolTest2 OR PseudoUpThrust OR pseudoUtCond OR noDemandBar OR stopVolume OR trendChange OR buyCond OR noSupplyBar;
 
if( Status("action") == actionCommentary ) 	printf ( "==================== Volume Price Analysis V.3.0 ====================\n");
 
printf ( Name() + " - " + Interval(2) +  "  - " + Date() + " - " + "\n" + 
	StrFormat("High  %g   \nLow  %g \nOpen  %g \nClose  %g \nVolume  %g ", H, L, O, C, V));
WriteIf(Vpc,"====================\nVolume Analysis Commentary:","");
 
WriteIf(upThrustBartrue , "\nUp-thrusts are designed to catch stops and to mislead as many traders as possible. " +  
	"They are normally seen after there has been weakness in the background. The market makers know that the " +
	"market is weak, so the price is marked up to catch stops, encourage traders to go long in a weak market, " +
	"AND panic traders that are already Short into covering their very good position.","") 
+
WriteIf(upThrustCond3,"\n  This upthrust bar is at high volume. This is a sure sign of weakness. One may even seriously " + 
	"consider ending the Longs AND be ready to reverse","")
+
WriteIf(upThrustBartrue OR upThrustCond3,"\nAlso note that A wide spread " +
	"down-bar that appears immediately after any up-thrust, tends to confirm the weakness (the market makers are " + 
	"locking in traders into poor positions). With the appearance of an upthrust you should " +
	"certainly be paying attention to your trade AND your stops. On many upthrusts you will find that the market will " + 
	"'test' almost immediately.","")
+
WriteIf(upThrustCond1, "\nA wide spread down bar following a Upthrust Bar. " +
	"This confirms weakness. The Smart Money is locking in Traders into poor positions","");
 
WriteIf(upThrustCond2 , "\nAlso here the volume is high( Above Average).This is a sure sign of weakness. The Smart Money is " +
	"locking in Traders into poor positions","")
+
WriteIf(strengthDown, "\nStrength Bar. The stock has been in a down Trend. An upbar " +
	"with higher Volume closing near the High is a sign of strength returning. The downtrend is likely to reverse soon. ","")
+
WriteIf(strengthDown1,"\nHere the volume is very much above average. This makes this indication more stronger. ","")
+ 
WriteIf(buyCond,"\nThe previous bar saw strength coming back. This upbar confirms strength. ","")
+
WriteIf(PseudoUpThrust,"\nA pseudo Upthrust. This normally appears after an Up Bar with above average volume. This looks like an upthrust bar " +
	"closing down near the Low. But the Volume is normally Lower than average. this is a sign of weakness.If the Volume is High then weakness " + 
	"increases. Smart Money is trying to trap the retailers into bad position. ","")
+
WriteIf(pseudoUtCond, "\nA downbar after a pseudo Upthrust Confirms weakness. If the volume is above average the weakness is increased. ","")
+
WriteIf(lowVolTest1,"\nThe previous bar was a successful Test of supply. The current bar is a upbar with higher volume. This confirms strength","")
+
WriteIf(distributeBar,"\nA wide range, high volume bar in a up trend closing down is an indication the Distribution is in progress. " + 
	"The smart money 	is Selling the stock to the late Comers rushing to Buy the stock NOT to be Left Out Of a Bullish move. ","")
+
WriteIf(lowVolTest2,"\nThe previous bar was a successful Test of supply. The current bar is a upbar with higher volume. This confirms strength","")
+
WriteIf(trendChange,"\nThe stock has been moving up on high volume. The current bar is a Downbar with high volume. Indicates weakness and probably end of the up move","")
+
WriteIf(effortUp,"\nEffort to Rise bar. This normally found in the beginning of a Markup Phase and is bullish sign. " +
	"These may be found at the top of an Upmove as the Smart money makes a last effort to move the price to the maximum","")
+
WriteIf(effortDown,"\nEffort to Fall bar. This normally found in the beginning of a Markdown phase.","")
+
WriteIf(noSupplyBar,"\nNo Supply. A no supply bar indicates supply has been removed and the Smart money can markup the price. It is better to wait for confirmation","")
+
WriteIf(stopVolume,"\nStopping Volume. This will be an downbar during a bearish period closing towards the Top accompanied by High volume. " +
	"A stopping Volume normally indicates that smart money is absorbing the supply which is a Indication that they are Bullishon the MArket. " +
	"Hence we Can expect a reversal in the down trend. ","")
+
WriteIf(noDemandBar, "\nNo Demand Brief Description: \n  Any up bar which closes in the middle OR Low, especially if the Volume has fallen off, is a potential sign of weakness. " +
	"Things to Look Out for: \n  if the market is still strong, you will normally see signs of strength in the next few bars, which will most probably show itself as a: " +
	"* Down bar with a narrow spread, closing in the middle OR High. * Down bar on Low Volume.","");
_SECTION_END();
//====================================================================================|
//                       Support & Resistance  Lines                                  |
//====================================================================================|
_SECTION_BEGIN("RS Lines");
// AFL By Karthikmarar
// RESISTANCE AND SUPPORT LINES AFL VERSION 2.00
// Provids upto total 20 lines. Two Adjustable Parameters. 1) Sensitivity and 2) Number of lines
// Depending on the Share Volatility, the Sensitivity Factor can be adjusted
// Support Lines are colored Blue and Resistance Line are colored Red.
SetChartOptions(0,chartShowArrows|chartShowDates);
sr=ParamToggle("Plot Supp/Res lines","No|Yes" ,0);
Per=Param("Sensitivity",6,2,15,1);
g=Param("No.of Lines",5,1,10,1);
x=Cum(1);
Pk1=PeakBars(H,per,1)== 0;
Tk1=TroughBars(L,per,1)== 0;
//peak detection
px1=LastValue(ValueWhen(pk1,x,1));
px2=LastValue(ValueWhen(Pk1,x,2));
px3=LastValue(ValueWhen(Pk1,x,3));
px4=LastValue(ValueWhen(pk1,x,4));
px5=LastValue(ValueWhen(Pk1,x,5));
px6=LastValue(ValueWhen(Pk1,x,6));
px7=LastValue(ValueWhen(pk1,x,7));
px8=LastValue(ValueWhen(Pk1,x,8));
px9=LastValue(ValueWhen(Pk1,x,9));
px10=LastValue(ValueWhen(Pk1,x,10));
//Trough  Detection
tx1=LastValue(ValueWhen(Tk1,x,1));
tx2=LastValue(ValueWhen(Tk1,x,2));
tx3=LastValue(ValueWhen(Tk1,x,3));
tx4=LastValue(ValueWhen(Tk1,x,4));
tx5=LastValue(ValueWhen(Tk1,x,5));
tx6=LastValue(ValueWhen(Tk1,x,6));
tx7=LastValue(ValueWhen(Tk1,x,7));
tx8=LastValue(ValueWhen(Tk1,x,8));
tx9=LastValue(ValueWhen(Tk1,x,9));
tx10=LastValue(ValueWhen(Pk1,x,10));
//values when Peaks occured
XT1 =LastValue(ValueWhen(pk1,H,1));
XT2 =LastValue(ValueWhen(Pk1,H,2));
XT3 =LastValue(ValueWhen(Pk1,H,3));
XT4 =LastValue(ValueWhen(pk1,H,4));
XT5 =LastValue(ValueWhen(Pk1,H,5));
XT6 =LastValue(ValueWhen(Pk1,H,6));
XT7 =LastValue(ValueWhen(pk1,H,7));
XT8 =LastValue(ValueWhen(Pk1,H,8));
XT9 =LastValue(ValueWhen(Pk1,H,10));
XT10 =LastValue(ValueWhen(Pk1,H,10));
//Value when troughs occured
YT1 =LastValue(ValueWhen(tk1,L,1));
YT2 =LastValue(ValueWhen(tk1,L,2));
YT3 =LastValue(ValueWhen(tk1,L,3));
YT4 =LastValue(ValueWhen(tk1,L,4));
YT5 =LastValue(ValueWhen(tk1,L,5));
YT6 =LastValue(ValueWhen(tk1,L,6));
YT7 =LastValue(ValueWhen(tk1,L,7));
YT8 =LastValue(ValueWhen(tk1,L,8));
YT9 =LastValue(ValueWhen(tk1,L,10));
YT10 =LastValue(ValueWhen(tk1,L,10));
LastBar = Cum(1) == LastValue(Cum(1));
//plot peak lines
Plot(IIf(x>px1 AND g>=1 AND sr,XT1,Null),"P1",IIf( LastValue(C)>XT1, colorBlue, colorRed ));
Plot(IIf(x>px2 AND g>=2 AND sr,XT2,Null),"P2",IIf( LastValue(C)>XT2, colorBlue, colorRed ));
Plot(IIf(x>px3 AND g>=3 AND sr,XT3,Null),"P3",IIf( LastValue(C)>XT3, colorBlue, colorRed ));
Plot(IIf(x>px4 AND g>=4 AND sr,XT4,Null),"P4",IIf( LastValue(C)>XT4, colorBlue, colorRed ));
Plot(IIf(x>px5 AND g>=5 AND sr,XT5,Null),"P5",IIf( LastValue(C)>XT5, colorBlue, colorRed ));
Plot(IIf(x>px6 AND g>=6 AND sr,XT6,Null),"P6",IIf( LastValue(C)>XT6, colorBlue, colorRed ));
Plot(IIf(x>px7 AND g>=7 AND sr,XT7,Null),"P7",IIf( LastValue(C)>XT7, colorBlue, colorRed ));
Plot(IIf(x>px8 AND g>=8 AND sr,XT8,Null),"P8",IIf( LastValue(C)>XT8, colorBlue, colorRed ));
Plot(IIf(x>px9 AND g>=9 AND sr,XT9,Null),"P9",IIf( LastValue(C)>XT9, colorBlue, colorRed ));
Plot(IIf(x>px10 AND g>=10 AND sr,XT10,Null),"P10",IIf( LastValue(C)>XT10, colorBlue, colorRed ));
//plot Trough lines
Plot(IIf(x>tx1 AND g>=1 AND sr,YT1,Null),"T1",IIf( LastValue(C)>YT1, colorBlue, colorRed ));
Plot(IIf(x>tx2 AND g>=2 AND sr,YT2,Null),"T2",IIf( LastValue(C)>YT2, colorBlue, colorRed ));
Plot(IIf(x>tx3 AND g>=3 AND sr,YT3,Null),"T3",IIf( LastValue(C)>YT3, colorBlue, colorRed ));
Plot(IIf(x>tx4 AND g>=4 AND sr,YT4,Null),"T4",IIf( LastValue(C)>YT4, colorBlue, colorRed ));
Plot(IIf(x>tx5 AND g>=5 AND sr,YT5,Null),"T5",IIf( LastValue(C)>YT5, colorBlue, colorRed ));
Plot(IIf(x>tx6 AND g>=6 AND sr,YT6,Null),"T6",IIf( LastValue(C)>YT6, colorBlue, colorRed ));
Plot(IIf(x>tx7 AND g>=7 AND sr,YT7,Null),"T7",IIf( LastValue(C)>YT7, colorBlue, colorRed ));
Plot(IIf(x>tx8 AND g>=8 AND sr,YT8,Null),"T8",IIf( LastValue(C)>YT8, colorBlue, colorRed ));
Plot(IIf(x>tx9 AND g>=9 AND sr,YT9,Null),"T9",IIf( LastValue(C)>YT9, colorBlue, colorRed ));
Plot(IIf(x>tx10 AND g>=10 AND sr,YT10,Null),"T10",IIf( LastValue(C)>YT10, colorBlue, colorRed ));
//Crossing Resistance Lines
xt1c=Cross(C,xt1);
xt2c=Cross(C,xt2);
xt3c=Cross(C,xt3);
xt4c=Cross(C,xt4);
xt5c=Cross(C,xt5);
xt6c=Cross(C,xt6);
xt7c=Cross(C,xt7);
xt8c=Cross(C,xt8);
xt9c=Cross(C,xt9);
xt10c=Cross(C,xt10);
//Breaking support Lines
yt1c=Cross(yt1,C);
yt2c=Cross(yt2,C);
yt3c=Cross(yt3,C);
yt4c=Cross(yt4,C);
yt5c=Cross(yt5,C);
yt6c=Cross(yt6,C);
yt7c=Cross(yt7,C);
yt8c=Cross(yt8,C);
yt9c=Cross(yt9,C);
yt10c=Cross(yt10,C);
//Resistance approaching 
ax1=C<xt1 AND C>xt1*0.97;
ax2=C<xt2 AND C>xt2*0.97;
ax3=C<xt3 AND C>xt3*0.97;
ax4=C<xt4 AND C>xt4*0.97;
ax5=C<xt5 AND C>xt5*0.97;
ax6=C<xt6 AND C>xt6*0.97;
ax7=C<xt7 AND C>xt7*0.97;
ax8=C<xt8 AND C>xt8*0.97;
ax9=C<xt9 AND C>xt9*0.97;
ax10=C<xt10 AND C>xt10*0.97;
//Support approaching
ay1=C>yt1 AND C<yt1*1.03;
ay2=C>yt2 AND C<yt2*1.03;
ay3=C>yt3 AND C<yt3*1.03;
ay4=C>yt4 AND C<yt4*1.03;
ay5=C>yt5 AND C<yt5*1.03;
ay6=C>yt6 AND C<yt6*1.03;
ay7=C>yt7 AND C<yt7*1.03;
ay8=C>yt8 AND C<yt8*1.03;
ay9=C>yt9 AND C<yt9*1.03;
ay10=C>yt10 AND C<yt10*1.03;
//Resistance lines commentary
src1=xt1c OR xt2c OR xt3c OR xt4c OR xt5c OR xt6c OR xt7c OR xt8c OR xt9c OR xt10c OR yt1c OR yt2c OR yt3c OR yt4c OR yt5c OR yt6c OR yt7c OR yt8c OR yt9c OR yt10c;
src2=ax1 OR ax2 OR ax3 OR ax4 OR ax5 OR ax6 OR ax7 OR ax8 OR ax9 OR ax10 OR ay1 OR ay2 OR ay3 OR ay4 OR ay5 OR ay6 OR ay7 OR ay8 OR ay9 OR ay10;
WriteIf(src1 OR src2,"------------------------------------------","");
WriteIf(src1 OR src2,"SUPPORT/RESISTANCE COMMENTARY:\n","");
WriteIf(xt1c AND V>volAvg,"Resistance at "+xt1+"  crossed with high volume.Bullish.",
WriteIf(xt1c AND V<volAvg,"Resistance at "+xt1+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt2c AND V>volAvg,"Resistance at "+xt2+"  crossed with high volume.Bullish.",
WriteIf(xt2c AND V<volAvg,"Resistance at "+xt2+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt3c AND V>volAvg,"Resistance at "+xt3+"  crossed with high volume.Bullish.",
WriteIf(xt3c AND V<volAvg,"Resistance at "+xt3+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt4c AND V>volAvg,"Resistance at "+xt4+"  crossed with high volume.Bullish.",
WriteIf(xt4c AND V<volAvg,"Resistance at "+xt4+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt5c AND V>volAvg,"Resistance at "+xt5+"  crossed with high volume.Bullish.",
WriteIf(xt5c AND V<volAvg,"Resistance at "+xt5+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt6c AND V>volAvg,"Resistance at "+xt6+"  crossed with high volume.Bullish.",
WriteIf(xt6c AND V<volAvg,"Resistance at "+xt6+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt7c AND V>volAvg,"Resistance at "+xt7+"  crossed with high volume.Bullish.",
WriteIf(xt7c AND V<volAvg,"Resistance at "+xt7+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt8c AND V>volAvg,"Resistance at "+xt8+"  crossed with high volume.Bullish.",
WriteIf(xt8c AND V<volAvg,"Resistance at "+xt8+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt9c AND V>volAvg,"Resistance at "+xt9+"  crossed with high volume.Bullish.",
WriteIf(xt9c AND V<volAvg,"Resistance at "+xt9+"  crossed, but volume is less. caution adviced."," "))+
WriteIf(xt10c AND V>volAvg,"Resistance at "+xt10+" crossed with High Volume.Bullish.",
WriteIf(xt10c AND V<volAvg,"Resistance at "+xt10+" crossed, but volume is less. caution adviced."," "));
//Support line breaks Commentary
WriteIf(yt1c AND V>volAvg,"Support at "+yt1+"  is broken with high volume.Bearish.",
WriteIf(yt1c AND V<volAvg,"Support at "+yt1+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt2c AND V>volAvg,"Support at "+yt2+"  is broken with high volume.Bearish.",
WriteIf(yt2c AND V<volAvg,"Support at "+yt2+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt3c AND V>volAvg,"Support at "+yt3+"  is broken with high volume.Bearish.",
WriteIf(yt3c AND V<volAvg,"Support at "+yt3+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt4c AND V>volAvg,"Support at "+yt4+"  is broken with high volume.Bearish.",
WriteIf(yt4c AND V<volAvg,"Support at "+yt4+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt5c AND V>volAvg,"Support at "+yt5+"  is broken with high volume.Bearish.",
WriteIf(yt5c AND V<volAvg,"Support at "+yt5+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt6c AND V>volAvg,"Support at "+yt6+"  is broken with high volume.Bearish.",
WriteIf(yt6c AND V<volAvg,"Support at "+yt6+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt7c AND V>volAvg,"Support at "+yt7+"  is broken with high volume.Bearish.",
WriteIf(yt7c AND V<volAvg,"Support at "+yt7+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt8c AND V>volAvg,"Support at "+yt8+"  is broken with high volume.Bearish.",
WriteIf(yt8c AND V<volAvg,"Support at "+yt8+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt9c AND V>volAvg,"Support at "+yt9+"  is broken with high volume.Bearish.",
WriteIf(yt9c AND V<volAvg,"Support at "+yt9+"  is broken, but volume is less. caution adviced."," "))+
WriteIf(yt10c AND V>volAvg,"Support at "+yt10+"  is broken with high volume.Bearish.",
WriteIf(yt10c AND V<volAvg,"Support at "+yt10+"  is broken, but volume is less. caution adviced."," "));
//Resistance approaching Commentary
WriteIf(ax1 AND tls>0, "Price Approaching resistance at "+xt1+  ". ","")+
WriteIf(ax2 AND tls>0, "Price Approaching resistance at "+xt2+  ". ","")+
WriteIf(ax3 AND tls>0, "Price Approaching resistance at "+xt3+  ". ","")+
WriteIf(ax4 AND tls>0, "Price Approaching resistance at "+xt4+  ". ","")+
WriteIf(ax5 AND tls>0, "Price Approaching resistance at "+xt5+  ". ","")+
WriteIf(ax6 AND tls>0, "Price Approaching resistance at "+xt6+  ". ","")+
WriteIf(ax7 AND tls>0, "Price Approaching resistance at "+xt7+  ". ","")+
WriteIf(ax8 AND tls>0, "Price Approaching resistance at "+xt8+  ". ","")+
WriteIf(ax9 AND tls>0, "Price Approaching resistance at "+xt9+  ". ","")+
WriteIf(ax10 AND tls>0, "Price Approaching resistance at "+xt10+ ". ","");
WriteIf(ay1 AND tls<0, "Price Approaching Support at "+yt1+  ". ","")+
WriteIf(ay2 AND tls<0, "Price Approaching Support at "+yt2+  ". ","")+
WriteIf(ay3 AND tls<0, "Price Approaching Support at "+yt3+  ". ","")+
WriteIf(ay4 AND tls<0, "Price Approaching Support at "+yt4+  ". ","")+
WriteIf(ay5 AND tls<0, "Price Approaching Support at "+yt5+  ". ","")+
WriteIf(ay6 AND tls<0, "Price Approaching Support at "+yt6+  ". ","")+
WriteIf(ay7 AND tls<0, "Price Approaching Support at "+yt7+  ". ","")+
WriteIf(ay8 AND tls<0, "Price Approaching Support at "+yt8+  ". ","")+
WriteIf(ay9 AND tls<0, "Price Approaching Support at "+yt9+  ". ","")+
WriteIf(ay10 AND tls<0, "Price Approaching Support at "+yt10+  ". ","");
_SECTION_END();
//==========================================================================|
//                    Volume Lines Module                                   |
//==========================================================================|
// AFL Karthikmarar
// HIGH VOLUME LINES AFL VERSION 1.00
// Provids upto total 20 lines. Number of lines Adjustable from Parameter window
_SECTION_BEGIN("High Volume Lines");
vr=ParamToggle("Plot High volume lines","No|Yes" ,0);
j=Param("No.of High vol Lines",5,1,20,1);
k=Param("Volume factor",2,1.5,3,0.5);
y=Cum(1);
Hk1=V>k*volAvg;
//High volume detection
hx1=LastValue(ValueWhen(hk1,y,1));
hx2=LastValue(ValueWhen(hk1,y,2));
hx3=LastValue(ValueWhen(hk1,y,3));
hx4=LastValue(ValueWhen(hk1,y,4));
hx5=LastValue(ValueWhen(hk1,y,5));
hx6=LastValue(ValueWhen(hk1,y,6));
hx7=LastValue(ValueWhen(hk1,y,7));
hx8=LastValue(ValueWhen(hk1,y,8));
hx9=LastValue(ValueWhen(hk1,y,9));
hx10=LastValue(ValueWhen(hk1,y,10));
hx11=LastValue(ValueWhen(hk1,y,11));
hx12=LastValue(ValueWhen(hk1,y,12));
hx13=LastValue(ValueWhen(hk1,y,13));
hx14=LastValue(ValueWhen(hk1,y,14));
hx15=LastValue(ValueWhen(hk1,y,15));
hx16=LastValue(ValueWhen(hk1,y,16));
hx17=LastValue(ValueWhen(hk1,y,17));
hx18=LastValue(ValueWhen(hk1,y,18));
hx19=LastValue(ValueWhen(hk1,y,19));
hx20=LastValue(ValueWhen(hk1,y,20));
//values when High volume occured
XV1 =LastValue(ValueWhen(hk1,H,1));
XV2 =LastValue(ValueWhen(hk1,H,2));
XV3 =LastValue(ValueWhen(hk1,H,3));
XV4 =LastValue(ValueWhen(hk1,H,4));
XV5 =LastValue(ValueWhen(hk1,H,5));
XV6 =LastValue(ValueWhen(hk1,H,6));
XV7 =LastValue(ValueWhen(hk1,H,7));
XV8 =LastValue(ValueWhen(hk1,H,8));
XV9 =LastValue(ValueWhen(hk1,H,9));
XV10 =LastValue(ValueWhen(hk1,H,10));
XV11 =LastValue(ValueWhen(hk1,C,11));
XV12 =LastValue(ValueWhen(hk1,C,12));
XV13 =LastValue(ValueWhen(hk1,C,113));
XV14 =LastValue(ValueWhen(hk1,C,14));
XV15 =LastValue(ValueWhen(hk1,C,15));
XV16 =LastValue(ValueWhen(hk1,C,16));
XV17 =LastValue(ValueWhen(hk1,C,17));
XV18 =LastValue(ValueWhen(hk1,C,18));
XV19 =LastValue(ValueWhen(hk1,C,19));
XV20 =LastValue(ValueWhen(hk1,C,20));
LastBar = Cum(1) == LastValue(Cum(1));
//plot High Volume lines
Plot(IIf(y>hx1 AND j>=1 AND Vr,xv1,Null),"v1",colorYellow);
Plot(IIf(y>hx2 AND j>=2 AND Vr,xv2,Null),"v2",colorYellow);
Plot(IIf(y>hx3 AND j>=3 AND Vr,xv3,Null),"v3",colorYellow);
Plot(IIf(y>hx4 AND j>=4 AND Vr,xv4,Null),"v4",colorYellow);
Plot(IIf(y>hx5 AND j>=5 AND Vr,xv5,Null),"v5",colorYellow);
Plot(IIf(y>hx6 AND j>=6 AND Vr,xv6,Null),"v6",colorYellow);
Plot(IIf(y>hx7 AND j>=7 AND Vr,xv7,Null),"v7",colorYellow);
Plot(IIf(y>hx8 AND j>=8 AND Vr,xv8,Null),"v8",colorYellow);
Plot(IIf(y>hx9 AND j>=9 AND Vr,xv9,Null),"v9",colorYellow);
Plot(IIf(y>hx10 AND j>=10 AND Vr,xv10,Null),"v10",colorYellow);
Plot(IIf(y>hx11 AND j>=11 AND Vr,xv11,Null),"v11",colorYellow);
Plot(IIf(y>hx12 AND j>=12 AND Vr,xv12,Null),"v12",colorYellow);
Plot(IIf(y>hx13 AND j>=13 AND Vr,xv13,Null),"v13",colorYellow);
Plot(IIf(y>hx14 AND j>=14 AND Vr,xv14,Null),"v14",colorYellow);
Plot(IIf(y>hx15 AND j>=15 AND Vr,xv15,Null),"v15",colorYellow);
Plot(IIf(y>hx16 AND j>=16 AND Vr,xv16,Null),"v16",colorYellow);
Plot(IIf(y>hx17 AND j>=17 AND Vr,xv17,Null),"v17",colorYellow);
Plot(IIf(y>hx18 AND j>=18 AND Vr,xv18,Null),"v18",colorYellow);
Plot(IIf(y>hx19 AND j>=19 AND Vr,xv19,Null),"v19",colorYellow);
Plot(IIf(y>hx20 AND j>=20 AND Vr,xv20,Null),"v20",colorYellow);
_SECTION_END();
 
 
 
 
/////////////////////////////
 
// Supertrend - Translated from Kolier MQ4
// see: http://kolier.li/indicator/kolier-supertrend-indi
// translation in Amibroker AFL code by E.M.Pottasch, 2011
 
procedure calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice)
{
global buffer_line_down;
global buffer_line_up;
buffer_line_down = Null;
buffer_line_up = Null;
  
PHASE_NONE = 0;
PHASE_BUY = 1;
PHASE_SELL = -1;
  
phase=PHASE_NONE;
band_upper = 0;band_lower = 0;
    
for(i = ATR_Period + 1; i < BarCount; i++)
{
    band_upper = CalcPrice[i] + ATR_Multiplier * tr[i];
    band_lower = CalcPrice[i] - ATR_Multiplier * tr[i];
      
    if(phase==PHASE_NONE)
    {
        buffer_line_up[i] = CalcPrice[i];
        buffer_line_down[i] = CalcPrice[i];
    }
    if(phase!=PHASE_BUY && Close[i]>buffer_line_down[i-1] && !IsEmpty(buffer_line_down[i-1])) 
    {
        phase = PHASE_BUY;
        buffer_line_up[i] = band_lower;
        buffer_line_up[i-1] = buffer_line_down[i-1];
    }
    if(phase!=PHASE_SELL && Close[i]<buffer_line_up[i-1] && !IsEmpty(buffer_line_up[i-1]))
    {
        phase = PHASE_SELL;
        buffer_line_down[i] = band_upper;
        buffer_line_down[i-1] = buffer_line_up[i-1];
    }   
    if(phase==PHASE_BUY && ((TrendMode==0 && !IsEmpty(buffer_line_up[i-2])) || TrendMode==1) )
    {
        if(band_lower>buffer_line_up[i-1]) 
        {
            buffer_line_up[i] = band_lower;
        }
        else
        {
            buffer_line_up[i] = buffer_line_up[i-1];
        }
    }
    if(phase==PHASE_SELL && ((TrendMode==0 && !IsEmpty(buffer_line_down[i-2])) || TrendMode==1) )
    {
        if(band_upper<buffer_line_down[i-1])
        {
            buffer_line_down[i] = band_upper;
        }
        else
        {
            buffer_line_down[i] = buffer_line_down[i-1];
        }
    }
}
}
  
SetBarsRequired(sbrAll,sbrAll);
 
TrendMode = ParamToggle("TrendMode","Off|On",1);
ATR_Multiplier = Param("ATR_Multiplier",2,0.1,10,0.1);
ATR_Period = Param( "ATR_Period",5,1,20,1);
tr = ATR(ATR_Period);
  
CalcPrice = (H+L)/2;
calcTrend_proc(ATR_Period,tr,ATR_Multiplier,TrendMode,CalcPrice);
  
SetChartOptions(0,chartShowDates);
//Plot(C,"C",colorWhite,64);
 
if ( TrendMode == 1 )
{
    Plot( buffer_line_up, "\ntu", ColorRGB( 28, 134, 238 ), styleThick );
    Plot( buffer_line_down, " // td", ColorRGB( 205, 51, 51 ), styleThick );
 
 
    Plot( 4, "", IIf( buffer_line_up, colorBrightGreen, colorBlack ), styleOwnScale | styleArea | styleNoLabel, -0.5, 100 );
    Plot( 6, "", IIf( buffer_line_down, colorRed, colorBlack ), styleOwnScale | styleArea | styleNoLabel, -0.5, 100 );
}

SL = ( HHV( H, 26 ) + LLV( L, 26) )/2;// standard, base, or kijun-sen line
TL = ( HHV( H, 9 ) + LLV( L, 9 ) )/2;// turning, conversion, or tenkan-sen line
DL = Ref( C, 25 );						// delayed close price, or chikou span
Span1 = Ref( ( SL + TL )/2, -25 );		//Span1 and Span2 define the clouds
Span2 = Ref( (HHV( H, 52) + LLV(L, 52))/2, -25);

CStyle = ParamToggle("Showcandles?","N|Y");//Choose Candle or Line for Price Plot
hue = Param("Hue",140,0,255,1);
sat = Param("Sat",100,0,255,1);
bri = Param("bri",220,0,255,1);

MaxGraph = 8;
Refline = (Span1 + Span2)/2;
Graph0 = Refline;
Graph0Style = 16;//No line plotted, used as a reference line for arrows etc.
if(Cstyle )
Plot(C,"Price",colorWhite,styleCandle);
else
Plot(Close,"Close",colorWhite,styleCandle); 
Plot(SL,"SL",colorGreen,styleThick); 
Plot(TL,"TL",colorRed,styleThick); 
Plot(DL,"DL",colorYellow,styleThick); 
PlotOHLC(Span1,Span1,Span2,Span2,"Cloud",ColorHSB(Hue,sat,bri),styleCloud);

above = IIf(TL>Span1 AND TL>Span2,1,0);
within = IIf((TL>Span1 AND TL<Span2) OR (TL<Span1 AND TL>Span2) ,1,0);
below = IIf(TL<Span1 AND TL<Span2,1,0);
Buy = Cross(TL,SL);
Sell = Cross(SL,TL);
StrongBuy = Buy AND above;
MediumBuy = Buy AND within;
WeakBuy = Buy AND below;
StrongSell = Sell AND below;
MediumSell = Sell AND within;
WeakSell = Sell AND above;

IIf( (StrongBuy),PlotShapes(shapeUpArrow*StrongBuy,colorGreen),0);
IIf( (MediumBuy),PlotShapes(shapeUpTriangle*MediumBuy,colorGreen),0);
IIf( (WeakBuy),PlotShapes(shapeHollowUpArrow*WeakBuy,colorIndigo),0);
IIf( (StrongSell),PlotShapes(shapeDownArrow*StrongSell,colorRed),0);
IIf( (MediumSell),PlotShapes(shapeDownTriangle*MediumSell,colorRed),0);
IIf( (WeakSell),PlotShapes(shapeHollowDownArrow*WeakSell,colorBrown),0);

18 comments

1. systemtrader

thanks for the indi. can it be backtested, i am asking because the sell buy is only coming on screen for latest trades not for old ones.

2. satish1b

Sir
Pls mail mee ur Mobile No. at satishb@rediff.co.in

3. parth.desai@hotmail.com

@systemtrader

I have tested it for 2 months before uploading. It is difficult to get past sell /buy signals but you can get the Fibonacci levels with a click on the respected candle. Those red/green dotted lines are past signals.
I have tried it in few commodities so i request you to check and give me feedback .

satish1b You can reach me on parth.desaihotmail.com

4. shindeamar

Dear Sir,

Thanks for this indicator , some question ask you as per your golden rule price above cloud then buy, but stop loss?

System Generate Buy & sell signal, but not correct.

some erroer in formula in afl editor , but chart seeing normal.

Thanks

Amar

shindeamar21@gmail.com

5. avrumi

buy&sell not working.

6. manuski

I downloaded Amibroker trial version. I added your this formula. I am taking data from DI. Live chart is not getting displayed. I am seeing yesterday’s chart.

7. manuski

Your software is a cheating software. Any time buy signal anytime sell signal. Signal gets hidden on it’s own. Say sell signal came. After some down fall price started moving up. After 3-4 green candles sell signals wipes out and old buy signal continues.
Third class software.

8. Anant1088

Sounds promising , If you are trading in equity use 15 min TF, but there is one bummer it has all things buy sell target MACD except stoploss

9. nMaster

Your formula is goood. But sometimes popup alert and voice alert is repeating many times. How can i stop it ?

10. chatpurpose

This formula repaints. For example, check KPIT now from 25.07.2016. It repainted three times in a span of 15 days. not checked for commodities.

11. NHUCHAU

Nice but not play scan and explore

12. agapitoharmony

Hi Path Desai,

I´ve been using this afl for a short time and started loving this afl. Is there anyway to make this afl scan and explore, this would be great tool for us.

Thanks a lot.

13. xesachin

Disappointing Parth that you copied this AFL from http://www.wisestocktrader.com/indicators/4853-intraday-profit-maker-best-with-automation.

You did not even care to credit the source.

14. godisbogus

Dear Admin,
Please remove this afl. Its is repainting. Sure shot for becoming a Pauper.

15. administrator

There are a lot of forward looking formulas on this site. Bar replay is a good way to test them.

16. tanquyone

Thanks…………..

17. aman21175

can u please gv me a AFL with only ema 21 and supertrend 7-2 value

18. anu

HAHAHA guys in looking seem to be very good AFl but totally give fake signal if its gives buy signal but stock going down buy signal disappear automatically after next bar or if one bar showing stock up but next bar stock down so signal automatically disappear . if buy signal before five bar and stock not much up and down signal showing still buy signal but next candle stock down then buy signal generate before five candle disappear

Leave Comment

Please login here to leave a comment.

Back